|
System
requirement:
IBM compatible AT 80386 up CPU, minimum 1MB RAM and 10 MB
Hard disk capacities. Supper VGA graphic display adaptor,. VGA
display monitor. Optional
mouse
Two standard RS232
COM1 (9 pin D type connector) and COM2 (25 pin
D type connector) serial
ports.
One standard (25 pin D type
connector) parallel port
Any IBM
compatible computer AT
(80386, 80486 or higher) running MSDOS version 6.22 or windows (3.11, 95 and 98) is enough. It means that you
can use very old
IBM compatible computer, as well as new ones. You need
connection cable to run this demo version.Click here to get
info to make cable for your
self.
Operating system requirement:
MSDOS 6.20 up, Windows 3.11, Windows
95, Windows 98,
platform
You can download
demo version. from our website just click here
shdemo1.zipfor
using COM1 or
shdemo2.zip
using COM2. The software that you are
downloading is using one of COM port(s) 1 or 2. if your
computer is not using com port 1 for mouse then you can use
COM1: version ( most of laptops) other wise you should
use COM2: version software. (Good for most of desk top
comuters).
The software
is using one of COM port(s) 1 or 2.
if your computer is not using com port 1 for mouse then you
can use COM1: version ( most of laptops) other wise you
should use COM2: version software. (Good
for most of desk top comuters).
Anyhow the instructions are the same, just don't
run setup on windows 2000 ME and XP computer. Here is the
instruction for setup program:
1- Save the
downloaded file on a floppy diskette or in the hard disk. As
it is a zip file you need a zip utility program to open and
extract files.
2- Run setup
program.
3-Its serial number for
this version is: 7582-500979
4-At the
choose directory for installation don't forget to click the
browse button and select a working directory for that even if
the directory that it shows is acceptable.
5-When the
installation finished it will put an icon on the
desktop.
click here to download Manual for
SHTFD
|
